メンバー

客員准教授
黒瀬 隆 (Takashi Kurose)

学歴・職歴

2004年    博士(工学)(山形大学)

2004-2005年 山形大学VBL(博士研究員)

2005-2007年 南ミシシッピ大学(博士研究員)

2007-2014年 トヨタ自動車(株)

2014-2017年 トヨタ自動車ヨーロッパ 

2017年    山形大学(プロジェクト准教授)

専 門

樹脂複合材料,成形加工高分子レオロジー自動車用材料

研究業績
投稿論文​ 総説・解説著書等 招待講演 表彰
出願特許 登録特許 国際学会発表 国内学会発表

 


  1. W. Prasong, A. Ishigami, S. Thumsorn, T. Kurose and H. Ito:
    Improvement of Interlayer Adhesion and Heat Resistance of Biodegradable Ternary Blend Composite 3D Printing,
    Polymers, 13(5), 740, 20 pages, DOI: 10.3390/polym13050740, 2021
     

  2. K. Seshimo, H. Sakai, T. Watabe, D. Aoki, H. Sugita, K. Mikami, Y. Mao, A. Ishigami, S. Nishitsuji, T. Kurose, H. Ito and H. Otsuka:
    Segmented Polyurethane Elastomers with Mechanochromic and Self‐strengthening Functions,
    Angewandte Chemie International Edition, 133(4), 4 pages,
    DOI: 10.1002/ange.202015196, 2021
     

  3. Y. Abe, T. Kurose, M. V. A. Santos, Y. Kanaya, A. Ishigami, S. Tanaka and H. Ito:
    Effect of Layer Directions on Internal Structures and Tensile Properties of 17-4PH Stainless Steel Parts Fabricated by Fused Deposition of Metals,
    Materials, 14(2), 243, 12 pages, DOI: 10.3390/ma14020493, 2021
     

  4. J.H. Kim,  J.S. Hong, A. Ishigami, T. Kurose, H. Ito and K.H. Ahn:
    Effect of Melt-Compounding Protocol on Self-Aggregation and Percolation in a Ternary Composite,
    Polymers, 12(12), 3041, 17 pages, DOI: 10.3390/polym12123041, 2020
     

  5. Y. Mao, Y. Kubota, T. Kurose, A. Ishigami, K. Seshimo, D. Aoki, H. Otsuka and H. Ito:
    Energy Dissipation and Mechanoresponsive Color Evaluation of a Poly(n-hexyl Methacrylate) Soft Material Enhanced by a Mechanochromic Cross-Linker with Dynamic Covalent Bonds,
    Macromolecules, 53(21), 9313-9324, DOI: 10.1021/acs.macromol.0c01770, 2020
     

  6. A. Ishigami, K. Watanabe, T. Kurose and H. Ito:
    Physical and Morphological Properties of Tough and Transparent PMMA-Based Blends Modified with Polyrotaxane,
    Polymers, 12(8), 1790, 13 pages, DOI: 10.3390/polym12081790, 2020
     

  7. H. Sakai, D. Aoki, K. Seshimo, K. Mayumi, S. Nishitsuji, T. Kurose, H. Ito and H. Otsuka:
    Visualization and Quantitative Evaluation of Toughening Polymer Networks by a Sacrificial Dynamic Cross-Linker with Mechanochromic Properties,
    ACS Macro Letters, 9(8), 1108-1113, 2020
     

  8. T. Kurose, Y. Abe, M. V. A. Santos, Y. Kanaya, A. Ishigami, S. Tanaka and H. Ito:
    Influence of the Layer Directions on the Properties of 316L Stainless Steel Parts Fabricated through Fused Deposition of Metals,
    Materials, 13, 2493, 12 pages, DOI: 10.3390/ma13112493, 2020
     

  9. N. Chuaponpat, T. Ueda, A. Ishigami, T. Kurose and H. Ito:
    Morphology, Thermal and Mechanical Properties of Co-Continuous Porous Structure of PLA/PVA Blends by Phase Separation,
    Polymers, 12(5), 1083, 20 pages, DOI: 10.3390/polym12051083, 2020
     

  10. W. Prasong, P. Muanchan, A. Ishigami, S. Thumsorn, T. Kurose and H. Ito:
    Properties of 3D Printable Poly(lactic acid)/Poly(butylene adipate-co-terephthalate)Blends and Nano Talc Composites,
    Journal of Nanomaterials, vol. 2020,8040517, 16 pages, DOI: 10.1155/2020/8040517 (2020)
     

  11. T. Kurose, H. Shishido, A. Ishigami, A. Nemoto and H. Ito:
    Fabrication of High-Resolution Conductive Patterns on a Thermally Imprinted Polyetherimide Film by the Capillary Flow of Conductive Ink,
    Microsystem Technologies, 6 pages, DOI: 10.1007/s00542-020-04749-1 (2020)
     

  12. P. Muanchan, T. Kurose and H. Ito:
    Replication of Mesoscale Pore One-dimensional Nanostructures:
    Surface-induced Phase Separation of Polystyrene/Poly(vinyl alcohol) (PS/PVA) Blends,
    Polymers, 11(6), 1039, 18 pages, DOI: 10.3390/polym11061039 (2019)
     

  13. P. Muanchan, T. Kurose and H. Ito:
    Replication and Thermal Properties of One-Dimensional Composite Nanostructures
    with Enhanced Mechanical Robustness,
    Journal of The Electrochemical Society, 166(9), B3282-B3289 (2019)
     

  14. A. Ishigami, S. Nishitsuji, T. Kurose and H. Ito:
    Evaluation of toughness and failure mode of PA6/mSEBS/PS ternary blends
    with an oil-extended viscoelastic controlled interface, Polymer, 177, 57-64 (2019)
     

  15. C. Liu, A. Ishigami, T. Kurose and H. Ito:
    Evaluation of Internal Morphology and Engineering Properties of Graphite Filled UHMWPE Nanocomposites Produced Using a Novel Octa-screw Kneading Extruder,
    Journal of Polymer Engineering, 20180288, 7 pages, DOI: 10.1515/polyeng-2018-0288
    (2018)
     

  16. Y. Hashimoto, S. Nishitsuji, T. Kurose and H. Ito: 
    Structural Formation of UHMWPE Film Tracked by Real-Time Retardation Measurements during Uniaxial/Biaxial Stretching,
    Materials, 11, 2292, 14 pages, DOI: 10.3390/ma11112292 (2018)
     

  17. A. Ishigami, T. Konno, T. Kurose, S. Nishitsuji, M. Ishikawa and H. Ito:
    Comparative Study on Polyamide 6 Toughness using Multiple Melt-Kneading Techniques,
    Academic Journal of Polymer science, 1(3), 555563, 4 pages (2018)
     

  18. S. Koido, T. Kawai, S. Kuroda, K. Nishida, T. Kanaya, M. Kato, T. Kurose and K. Nakajima:
    Mesomorphic phase formation of plasticized poly(l-lactic acid)
    Journal of Applied Polymer Science, Vol. 131, p39762 (2014)
     

  19. S. Koido, T. Kawai, S. Kuroda, K. Nishida, T. Kanaya, M. Kato, T. Kurose and K. Nakajima:
    The effect of addition of plasticizer on crystallization for polymer
    Next Generation Polyolefins, Vol.5, p107 (2011)
     

  20. T. Kurose, V. Yudin, J. Otaigbe and V. M. Svetlichnyl:
    Compatibilized polyimide (R-BAPS) / BAPS-modified clay nanocomposite with improved dispersion and properties
    Polymer, Vol.48, p7130 (2007)
     

  21. T. Kurose, K. Urman, J. Otaigbe, R. Y. Lochhead and S. F. Thames:
    Effect of uniaxial drawing of soy protein isolate biopolymer film on structure and mechanical properties
    Polymer Engineering & Science, Vol.47, p374 (2007)
     

  22. T. Kurose, T. Takashashi, M. Sugimoto, T. Taniguchi and K. Koyama:
    Uniaxial Elongational Viscosity of PC/A Small Amount of PTFE blend
    Journal of the Society of Rheology, Japan, Vol. 33, No. 4, p. 173-182 (2005)
     

  23. T. Kurose, T. Takahashi and K. Koyama:
    A new process to make a porous PTFE structure from aqueous PTFE dispersion with the help of hydrogel
    Journal of Porous Materials, Vol. 11, No. 3, p.173-181 (2004)
     

  24. ​T. Kurose, T. Takahashi and K. Koyama:
    Uniaxial elongational viscosity of FEP/a small amount of PTFE blends
    Journal of the Society of Rheology, Japan., Vol. 31, No. 4, p. 195-200 (2003)
     

  25. T. Kurose, T. Takahashi, A. Nishioka, Y. Masubuchi, J. Takimoto and K. Koyama:
    The effect of pre-thermal history on shear and uniaxial elongational viscosity of a tetrafluoroethylene / hexafluoropropylene copolymer near the crystal melting transition
    Rheologica Acta, Vol. 42, p. 338-344 (2003)


 


  1. 石神明, 黒瀬隆, 伊藤浩志:
    接着・接合の支配要因と最適化技術,
    第1章 11 射出成形による樹脂/金属の接合技術とその接合メカニズム,
    S&T出版株式会社, 68-76, 2021(共著)
     

  2. 黒瀬隆伊藤浩志:
    ナノインプリント技術ハンドブック,
    第Ⅰ編 基礎編 第7章ナノインプリント材料 7. 1 材料科学 7.1.2 高分子成形加工の基礎,
    応用物理学会・ナノインプリント技術研究会編 委員長 平井義彦株式会社オーム社203-209, 2019
     

  3. 伊藤浩志,黒瀬隆:精密射出成形を用いた微細転写と表面機能制御,
    プラスチックス,70(4),1-7,2019
     

  4. 黒瀬隆,伊藤浩志:マイクロナノモールディングの現状とこれからへの期待
    プラスチックス・エージ,65(1),55-61,2019
     

  5. 黒瀬隆,伊藤浩志:
    射出成型による樹脂/金属の接合技術とその接合メカニズム
    日本接着学会誌,54(5),187-194,2018
     

  6. 黒瀬隆,伊藤浩志
    マイクロ・ナノモールディング技術の現状とこれからへの期待
    ラスチックス・エージ,64(1),38-46,2018

 


  1. 伊藤浩志,パリタットムンチャン,渡邉裕貴,加納航太,石神明,黒瀬隆:
    高分子精密成形加工を用いた様々なナノ構造体の作製とその機能性,
    第69回高分子討論会,3A02IL,2020(9/16-9/18,オンライン)
     

  2. A. Ishigami, S. Nishitsuji, T. Kurose and H. Ito:
    Novel Tough Polymer by Special Melt Kneading Processes,
    The Second International Conference of Polymeric and Organic Materials in Yamagata University (IPOMY),
    IN17 (Keynote Speaker), 2019, (Yonezawa, Japan)
     

  3. H. Ito, A. Ishigami, K. Watanabe, Y. Kodama, T. Kurose and S. Nishitsuji:
    Fracture Behaviors of Amorphous Polymer Blends Fabricated by High-Shear Kneading Processing,
    Materials Research Meeting 2019 , C4-12-I12, 2019, (Yokohama, Japan)
     

  4. H. Ito, A. Ishigami, S. Nishitsuji and T. Kurose:
    Novel Fabrication of Tough Polymer Blends Obtained by Special Kneading Processing,
    The 6th Federation of Asian Polymer Societies Polymer Congress (FAPS) 2019,
    S6-1-1, 2019, (Taipei, Taiwan)
     

  5. H. Ito, A. Ishigami, S. Nishituji and T. Kurose:
    Fundamental and Recent Progress of Polymer Processing,
    28th Annual Meeting of the Materials Research Society of Japan (MRS-J),
    F9-I19-001, 2018, (Kitakyushu, Japan)
     

  6. H. Ito, Y. Kodama, R. Tamamura, P. Muanchan, A. Ishigami and T. Kurose:
    Structures and Fracture Progress for Novel Polymers and Its Blends under High-Speed Deformation,
    Asian Workshop on Polymer Processing (AWPP), KN01 (Keynote Lecture),
    2018, (Chiang Mai, Thailand)
     

  7. H. Ito, A. Ishigami, Y. Kodama, R. Tamamura, P. Muanchan and T. Kurose:
    Superior Tough Polymers: Recent Advances in Polymer Processing,
    The 10th International Conference on Materials Science and Technology (MSAT-10),
    POL-I-02, 2018, (Bangkok, Thailand) 
     

  8. H. Ito, T. Konno, R. Tamamura, Y. Kodama, F. Sakakibara, A. Ishigami, T. Kurose and S. Nishitsuji:
    High-Speed Fracture Behaviors on Novel Polymers and Its Blends,
    256th ACS National Meeting & Exposition, PMSE,
    Multifunctional Nanocomposites & Surface Damage Phenomena in Polymers,
    ID 693, 2018, (Boston, USA)
     

  9. T. Kurose, Y. Yamada, H. Ito, Y. Takahashi, F. Keitoku, H. Sano and Y. Fujita:
    High Thermal Conductivity Polycarbonate Composites Obtained by Phase Separation Method,
    11th Asian-Australasian Conference on Composite Materials (ACCM-11),
    Comp-7-4-I2, 2018, (Cairns, Australia)
     

  10. H. Ito, F. Sakakibara, A. Ishigami, T. Kurose, H. Baba and M. Fujita:
    Characterizations of Engineering Properties and Higher-Order Structure of Injection Molded Gw (Glass Wool)-Filled PP Composites,
    11th Asian-Australasian Conference on Composite Materials (ACCM-11),
    Comp-8-1-I2, 2018, (Cairns, Australia)
     

  11. A. Ishigami, T. Kurose and H. Ito: 
    Structural and Physical Properties of PA6/SEBS-g-MA/PS Ternary Blends
    34th International Conference of the Polymer Processing Society (PPS-34)
    G05-166 (Keynote talk), 2018, (Taipei, Taiwan)
     

  12. T. Kurose: Toyota expectation to future plastic material and technology
    SAMPE EUROPE SUMMIT 2016, March 2016, Paris, France.

  1. The Outstanding Poster Award on the Fiber Society Spring 2018 Conference
    June 2018, Tokyo, Japan.
     

  2. 黒瀬隆,高橋辰宏,杉本昌隆,谷口貴志,小山清人:
    Uniaxial Elongational Viscosity of PC/A Small Amount of PTFE blend
    2006年度日本レオロジー学会論文賞2007年4月

  3. 黒瀬隆,高橋辰宏,小山清人:
    フッ素樹脂多孔質体の開発

    第14回プラスチック成形加工学会年次大会ベストポスター賞東京2003年6月
  1. 特開2004-359936 多孔質体、その製造方法、及び多孔質体を利用した複合材料
  2. 特開2010-070729 ポリ乳酸系樹脂成形体の製造方法及びポリ乳酸系樹脂成形体
  3. 特開2010-110961 ポリ乳酸系樹脂成形品の製造方法
  4. 特開2010-126643 耐衝撃性ポリ乳酸系樹脂組成物
  5. 特開2011-032490 多孔質体の製造方法
  6. 特開2011-047658 ポリ乳酸系樹脂の結晶化に用いる結晶造核剤の添加濃度の評価方法
  7. 特開2013-014681 自動車装備部品(PP-PLA発泡体)
  8. 特開2013-129064 繊維強化樹脂材の製造方法
  9. 特開2014-141582 FRPシートの製造方法
  10. 特開2015-136923 被加熱材の加熱装置およびその加熱方法
  11. WO2018-108252 VEHICLE TAILGATE STRUCTURE
  12. 特願2019-220620 複合樹脂部材の製造方法
  13. 特願2020-108105 複合部材の製造方法及び板状複合部材
  14. 特願2020-131550 複合樹脂部材の製造方法
  1. 特許4999128 多孔質体の製造方法
  2. 特許5335174 多孔質体、その製造方法、及び多孔質体を利用した複合材料
  3. 特許5341478 ポリ乳酸系樹脂成形品の製造方法
  4. 特許5958360 FRPシートの製造方法

 


  1. K. Hasegawa, A. Ishigami, A. Nemoto, T. Kurose and H. Ito:
    Surface Transferability of Liquid Silicone Rubber Molded by Injection Molding Process,
    The Second International Conference of Polymeric and Organic Materials in Yamagata University (IPOMY),
    PC15, 2019, (Yonezawa, Japan)

  2. T. Otoshi, A. Ishigami, T. Kurose, H. Mukae, M. Komori, H. Kono and H. Ito:
    Fundamental Study of Fluoropolymer/BN Filled Composites with Highly Thermal Conductive,
    The Second International Conference of Polymeric and Organic Materials in Yamagata University (IPOMY),
    PC14, 2019, (Yonezawa, Japan)

  3. Y. Sako, T. Kurose and H. Ito:
    Preparation and Mechanical Properties of Metal Flake Particles/Epoxy Resin Composites,
    The Second International Conference of Polymeric and Organic Materials in Yamagata University (IPOMY),
    PC13, 2019, (Yonezawa, Japan)

  4. W. Prasong, P. Muanchan, S. Thumsorn, T. Kurose and H. Ito:
    Biodegradable Materials for 3D Printing from PLA/PBAT-Nano Talc Composites,
    The Second International Conference of Polymeric and Organic Materials in Yamagata University (IPOMY),
    PC12, 2019, (Yonezawa, Japan)

  5. T. Ueda, A. Ishigami, T. Kurose and H. Ito:
    Mechanical and Structural Properties of Cellulose nanofibers Reinforced Polyvinyl alcohol Composites,
    The Second International Conference of Polymeric and Organic Materials in Yamagata University (IPOMY),
    PC11, 2019, (Yonezawa, Japan)

  6. A. Ishigami, T. Kurose and H. Ito:
    Evaluation of Toughness and Failure Mode of PA6/mSEBS/PS Ternary Blends with an Oil-Extended Viscoelastic Controlled Interface,
    Materials Research Meeting 2019 , C4-13-P15, 2019, (Yokohama, Japan)

  7. Y. Sako, T. Kurose and H. Ito:
    Preparation and Mechanical Properties of Metal Flake Particles/Epoxy Resin Composites,
    Materials Research Meeting 2019 , C2-12-P11, 2019, (Yokohama, Japan)

  8. Y. Watanabe, A. Ishigami, S. Nishitsuji, T. Kurose and H. Ito:
    Evaluation of the Relationship between Internal Structures and Mechanical Properties in Mulutilayer Films,
    Materials Research Meeting 2019 , C2-12-P09, 2019, (Yokohama, Japan)

  9. T. Kurose, Y. Sako and H. Ito:
    Fabrication and Mechanical Properties of Metal Flake Particles/Epoxy Resin Composite,
    Materials Research Meeting 2019 , C2-13-O03, 2019, (Yokohama, Japan)

  10. T. Ueda, A. Ishigami, T. Kurose and H. Ito:
    Mechanical and Morphological Properties of Cellulose Nanofibers Reinforced Polymer Composites,
    The 18th Asian Workshop on Polymer Processing (AWPP) 2019,
    PS-05, 2019, (Beijing, China)

  11. W. Prasong, P. Muanchan, S. Thumsorn, T. Kurose and H. Ito:
    3D Printable of Biodegradable Material of PLA/PBAT - Nano Talc Composites,
    The 18th Asian Workshop on Polymer Processing (AWPP) 2019,
    O-034, 2019, (Beijing, China)

  12. S. Mikoshiba, A. Ishigami, T. Kurose and H. Ito:
    Mechanical Properties and Higher-Order Structural Analysis of Polybutylene Terephthalate/Polyrotaxane Blends,
    The 6th Federation of Asian Polymer Societies Polymer Congress (FAPS) 2019,
    S6-P-002, 2019, (Taipei, Taiwan)

  13. C. Liu, A. Ishigami, T. Kurose and H. Ito:
    Evaluation of Wear Resistance and Engineering Properties of UHMWPE/Graphene Composites Prepared via a Novel Kneading Process,
    The 6th Federation of Asian Polymer Societies Polymer Congress (FAPS) 2019,
    S5-4-4, 2019, (Taipei, Taiwan)

  14. K. Hasegawa, A. Ishigami, A. Nemoto, T. Kurose and H. Ito:
    Surface Transferability of Liquid Silicone Rubber Molded by Injection Molding Process,
    The 6th Federation of Asian Polymer Societies Polymer Congress (FAPS) 2019,
    S6-3-2, 2019, (Taipei, Taiwan)

  15. C. Liu, A. Ishigami, T. Kurose and H. Ito:
    Evaluation of Engineering Properties of Graphene Filled Uhmwpe Composites Prepared via a Novel Kneading Process,
    Polymer Engineering and Science International Conference (PESI) 2019,
    PESI-1061, 2019, (Yonezawa, Japan)

  16. T. Otoshi, A. Ishigami, T. Kurose, H. Mukae, M. Komori, H. Kono and H. Ito:
    Fundamental Study of Fluoropolymer/BN Filled Composites with Highly Thermal Conductive,
    Polymer Engineering and Science International Conference (PESI) 2019,
    PESI-1050, 2019, (Yonezawa, Japan)

  17. T. Ueda, A. Ishigami, T. Kurose and H. Ito:
    Evaluation of Higher-order Structure and Mechanical Properties of Cellulose Nanofibers/epoxy Composites,
    Polymer Engineering and Science International Conference (PESI) 2019,
    PESI-1046, 2019, (Yonezawa, Japan)

  18. Y. Hanzawa, T. Kurose, H. Koseko and H. Ito:
    Fabrication and Hydrophilic Evaluation of Nanoparticles-filled Polymer Composites,
    Polymer Engineering and Science International Conference (PESI) 2019,
    PESI-1045, 2019, (Yonezawa, Japan)

  19. S. Takahashi, A. Ishigami, T. Kurose, M. Fujita and H. Ito:
    Relationship between Internal Structures and Mechanical Properties of 3D Printed PP/GW Composite,
    Polymer Engineering and Science International Conference (PESI) 2019,
    PESI-1044, 2019, (Yonezawa, Japan)

  20. S. Mikoshiba, A. Ishigami, T. Kurose and H. Ito:
    Mechanical Properties and Higher-order Structural Analysis of Polybutylene Terephthalate/polyrotaxane Blends,
    Polymer Engineering and Science International Conference (PESI) 2019,
    PESI-1040, 2019, (Yonezawa, Japan)

  21. K. Hasegawa, A. Ishigami, A. Nemoto, T. Kurose and H. Ito:
    Research on the Surface Transferability of Liquid Silicone Rubber Molded by Injection Molding Process,
    Polymer Engineering and Science International Conference (PESI) 2019,
    PESI-1038, 2019, (Yonezawa, Japan)

  22. Y. Hanzawa, T. Kurose, H. Koseko and H. Ito:
    Fabrication and Hydrophilic Characterization of Nanoparticles-filled Polymer Composites,
    22nd International Conference on Composite Materials (ICCM) 2019,
    P2313-7, 2019, (Melbourne, Australia)

  23. Y. Sako, T. Kurose and H. Ito:
    Preparation and Mechanical Properties of Metal Flake Particles/resin Composite,
    22nd International Conference on Composite Materials (ICCM) 2019,
    P2301-6, 2019, (Melbourne, Australia)

  24. C. Liu, A. Ishigami, T. Kurose and H. Ito:
    Evaluation of engineering properties of graphene filled UHMWPE composites prepared via a novel kneading process,
    International Conference on Engineering and Applied Science (ICEAS) 2019,
    ICEAS-0235, 2019, (Hawaii, USA)

  25. Y. Watanabe, A. Ishigami, S. Nishituji, T. Kurose and H. Ito:
    Preparation and Mechanical Properties Evaluation of Multilayer Film having Mille-Feuille Structure,
    International Research Symposium on Engineering and Technology (IRSET) 2019,
    IRSET-0252, 2019, (Ginowan, Japan)

  26. S. Takahashi, T. Kurose, M. Fujita and H. Ito:
    Relationship between Internal Structures and Mechanical Properties of 3D Printed PP/GW composites,
    International Research Symposium on Engineering and Technology (IRSET) 2019,
    IRSET-0251, 2019, (Ginowan, Japan)

  27. P. Muanchan, T. Kurose and H. Ito:
    Replication of Mesoscale Pore One-dimensional Nanostructures Obtained by Thermal Nanoimprint Process,
    The 35th International Conference of the Polymer Processing Society (PPS-35),
    S18-329, 2019, (Çeşme-İzmir, Turkey)

  28. C. Liu, A. Ishigami, T. Kurose and H. Ito:
    Evaluation of Engineering Properties of Graphene filled UHMWPE Composites Prepared via Novel Kneading Process,
    The 35th International Conference of the Polymer Processing Society (PPS-35),
    S10-354, 2019, (Çeşme-İzmir, Turkey)

  29. A. Ishigami, K. Watanabe, T. Kurose and H. Ito:
    Mechanical Properties and Fracture Behavior of PMMA and Polyrotaxane Blends,
    The 35th International Conference of the Polymer Processing Society (PPS-35),
    S07-370, 2019, (Çeşme-İzmir, Turkey)

  30. T. Otoshi, A. Ishigami, T. Kurose, H. Ito, H. Mukae, M. Komori and H. Kono:
    Fundamental Study of Fluoropolymer/BN Filled Composites with Highly Thermal Conductive,
    The First International Conference of Polymeric and Organic Materials in Yamagata University (IPOMY),
    PS28, 2019, (Yonezawa, Japan)

  31. K. Hasegawa, A. Ishigami, A. Nemoto, T. Kurose and H. Ito:
    Surface Replication and Physical Properties of Liquid Silicone Rubber Molded by Injection Molding Process,
    The First International Conference of Polymeric and Organic Materials in Yamagata University (IPOMY),
    PS37, 2018, (Yonezawa, Japan)

  32. K. Watanabe, A. Ishigami, T. Kurose and H. Ito:
    Evaluation of fracture process and physical properties of PMMA/PLA/PR blends,
    28th Annual Meeting of the Materials Research Society of Japan (MRS-J),
    F9-P20-010, 2018, (Kitakyushu, Japan)

  33. S. Mikoshiba, A. Ishigami, T. Kurose and H. Ito:
    Mechanical Properties of Polybutylene terephthalate / Polyrotaxane Blends,
    28th Annual Meeting of the Materials Research Society of Japan (MRS-J),
    F9-P20-006, 2018, (Kitakyushu, Japan)

  34. Y. Sato, A. Nemoto, T. Kurose, R. Kato and H. Ito:
    Physical Properties and Highly--Orderd Structure of the Modified PGA Moldings,
    Asian Workshop on Polymer Processing (AWPP), IE03, 2018, (Chiang Mai, Thailand)

  35. S. Ota, A. Nemoto, T. Kurose and H. Ito:
    Fundamental of Wiring on Three-dimensional Shape Surfaces Obtained by Imprinting Process,
    Asian Workshop on Polymer Processing (AWPP), NA05, 2018, (Chiang Mai, Thailand)

  36. P. Muanchan, T. Kurose and H. Ito:
    Structural Formation of One-Dimensional Porous Nanostructures Fabricated by Nanoimprinting and CO2 Foaming Processes,
    Asian Workshop on Polymer Processing (AWPP), NA06, 2018, (Chiang Mai, Thailand)

  37. T. Otoshi, A. Ishigami, T. Kurose, H. Mukae, M. Komori, H. Kono and H. Ito:
    Fundamental Study of Fluoropolymer/BN Filled Composites with Highly Thermal Conductive,
    Asian Workshop on Polymer Processing (AWPP), PC14, 2018, (Chiang Mai, Thailand)

  38. C. Liu, A. Ishigami, T. Kurose and H. Ito:
    Evaluation of High Engineering Properties UHMWPE/Graphite Composite by Octa-Screw Kneading Process,
    2018 International Conference on Smart Systems Engineering,
    CL-5, 2018, (Yonezawa, Japan)
     

  39. P. Muanchan, T. Kurose and H. Ito:
    Formation of Porous Polymer Nanostructures by Imprinting Process: Phase Separation and Foaming of PS/PVA Blend at the Nanoscale,
    The 10th International Conference on Materials Science and Technology (MSAT-10),
    POL-O-04, 2018, (Bangkok, Thailand)
     

  40. P. Muanchan, T. Kurose and H. Ito:
    Replication of Porous One-Dimensional Nanostructures: Phase Separation of Polystyrene/Poly(vinyl alcohol) Blend,
    The 10th International Conference of Modification, Degradation and Stabilization of Polymers (MoDeSt2018),
    ​OC-1-18, 2018, (Tokyo, Japan)
     

  41. C. Y. Liu, A. Ishigami, T. Kurose and H. Ito:
    Evaluation of Anti-wear Properties and Internal Morphology of Graphite filled UHMWPE Composites Obtained by Octa Screw Extruder Process,
    First International Conference on 4D Materials and Systems(4DMS),
    M03-0196, 2018, (Yonezawa, Japan)
     

  42. T. Ueda, T. Kurose, H. Ito, M. Nagasawa, M. Umahara, K. Morioka and J. Iwata:
    Evaluation of Internal Morphology and Mechanical properties of ABS/PMMA blend,
    First International Conference on 4D Materials and Systems(4DMS),
    M03-0182, 2018, (Yonezawa, Japan)
     

  43. H. Ito, J. Shoji, Y. Zhao, T. Kurose, M. Ishikawa and H. Watabe:
    Fracture Behavior of Solid Polymer Electrolyte Membranes with Different Ion Exchange Capacity for Fuel Cell,
    First International Conference on 4D Materials and Systems(4DMS),
    M03-0160, 2018, (Yonezawa, Japan)
     

  44. S. Ota, T. Kurose and H. Ito:
    Fabrication of Line & Space Structure and Wiring on 3D Surface Features with Imprinting Process,
    First International Conference on 4D Materials and Systems(4DMS),
    M03-0159, 2018, (Yonezawa, Japan)
     

  45. P. Muanchan, T. Kurose and H. Ito:
    Replication of One-Dimensional Composite Nanostructures with Enhanced Mechanically Robust and Thermal Conductivity,
    First International Conference on 4D Materials and Systems(4DMS),
    M03-0158, 2018, (Yonezawa, Japan)
     

  46. H. Suenaga, T. Kurose, K. Akamatsu, J. Jin and H. Ito:
    Thermal and Viscoelastic Properties of CFRTP with Reactive Process
    The 7th Pacific Rim Conference on Rheology, ORG1_101, 2018, (Jeju, Korea)
     

  47. C. Kaneko, T. Kurose, A. Nemoto and H. Ito:
    Relationship between Replication of Microstructure on Rubber and Rheological Roperties
    The 7th Pacific Rim Conference on Rheology, ORG1-051, 2018, (Jeju, Korea)
     

  48. K. Hasegawa, Y. Zhao, T. Kurose and H. Ito:
    Rheological Analysis of Liquid Silicone Rubber for Replication in Injection Molding
    The 7th Pacific Rim Conference on Rheology, POG1-038, 2018, (Jeju, Korea)
     

  49. F. Sakakibara, A. Ishigami, T. Kurose and H. Ito:
    Polymer Alloy of Polybutylene Terephthalate and Polyrotaxan, and Its Physical Properties
    The Fiber Society’s Spring 2018 Conference, FS-PII-08, 2018, (Tokyo, Japan)
     

  50. T. Kurose, K. Shishido, A. Nemoto and H. Ito:
    Fabrication of High-resolution Conductive Patterns on the Thermal Imprinted Polyetherimide film by Capillary Flow of Conductive Ink
    The Fiber Society’s Spring 2018 Conference, FS-PII-40, 2018, (Tokyo, Japan)
     

  51. Y. Kodama, A. Ishigami, T. Kurose, Y. Zhao, S. Nishitsuji and H. Ito:
    Evaluation of Internal Structure and Engineering Properties of Polymer Blends by Special Melt Mixing Process
    34th International Conference of the Polymer Processing Society (PPS-34),
    S05-273, 2018, (Taipei, Taiwan)
     

  52. F. Sakakibara, A. Ishigami, T. Kurose, F. Baba, H. Ito and M. Fujita:
    Characterizations of Engineering Properties and Higher-order Structure of Injection Molded GW-filled PP Composites
    34th International Conference of the Polymer Processing Society (PPS-34)
    G06-316, 2018, (Taipei, Taiwan)
     

  53. J. Shoji, M. Ishikawa, T. Kurose and H. Ito:
    Fracture Behavior of Solid Polymer Electrolyte Membranes with Different Ion Exchange Capacity for Fuel Cell
    34th International Conference of the Polymer Processing Society (PPS-34)
    G16-73, 2018, (Taipei, Taiwan)
     

  54. C. Liu, F. Sakakibara, Y. Kodama, A. Ishigami, Y. Zhao, T. Kurose and H. Ito:
    Evaluation of Engineering Properties and Internal Morphology​ of Graphite Filled UHMWPE Composites Obtained by Special​ ​Kneading Process
    34th International Conference of the Polymer Processing Society (PPS-34)
    S05-473, 2018, (Taipei, Taiwan)

 


  1. 移川航,石神明,黒瀬隆,伊藤浩志:
    インプリント技術によるフレキシブル配線シートの作製と電極特性,
    一般社団法人プラスチック成形加工学会第28回(令和2年度)成形加工シンポジア’20,
    G-207,2020(12/1-12/2,オンライン)


  2. 劉承穎,石神明,黒瀬隆,伊藤浩志:
    表面改質されたグラフェンの添加が新規八軸溶融混練法により作製されたUHMWPEコンポジットへ与える影響,
    一般社団法人プラスチック成形加工学会第28回(令和2年度)成形加工シンポジア’20,
    D-208,2020(12/1-12/2,オンライン)


  3. 原弘,石神明,黒瀬隆,長澤源伸,馬原誠,伊藤浩志:
    PC/変性PCブレンド射出成形品の表面硬度及び衝撃特性評価,
    一般社団法人プラスチック成形加工学会第28回(令和2年度)成形加工シンポジア’20,
    G-107,2020(12/1-12/2,オンライン)


  4. 御子柴翔太,石神明,黒瀬隆,伊藤浩志:
    8軸溶融混練法によるポリブチレンテレフタレート/ポリロタキサンブレンドの構造制御および物性評価,
    一般社団法人プラスチック成形加工学会第28回(令和2年度)成形加工シンポジア’20,
    G-106,2020(12/1-12/2,オンライン)


  5. 渡邉裕貴,石神明,西辻祥太郎,黒瀬隆,伊藤浩志:
    高分子多層フィルムにおけるキンク形成と機械特性の関係,
    一般社団法人プラスチック成形加工学会第28回(令和2年度)成形加工シンポジア’20,
    C-103,2019(12/1-12/2,オンライン)


  6. 中山一希,石神明,黒瀬隆,伊藤浩志,川崎正博,鈴木啓一郎,大久真司: 
    圧延法によるポリフッ化ビニリデン(PVDF)の構造相転移,
    ​2020年度繊維学会秋季研究発表会,2B14B,2020(11/5-11/6,オンライン)


  7. 半澤優樹,石神明,黒瀬隆,小瀬古久秋,伊藤浩志: 
    金属酸化物ナノ粒子充填系樹脂複合材料の作製と工業特性評価,
    2020年度繊維学会秋季研究発表会,1D03A,2020(11/5-11/6,オンライン)


  8. プラソングワッタナチャイ,石神明,トゥムソーンスパポーン,黒瀬隆,伊藤浩志:
    生分解性複合材料の3Dプリントにおける機械的特性および層間接着性評価,
    第69回高分子討論会,2ESA18,2020(9/16-9/18,オンライン)(ENGLISH SESSION)
     

  9. 上田翼,石神明,黒瀬隆,伊藤浩志:
    セルロース繊維強化複合材料の機械的特性と高次構造評価,
    第69回高分子討論会,PF0501,2020(9/16-9/18,オンライン)
     

  10. 加納航太,石神明,西辻祥太郎,黒瀬隆,伊藤浩志:
    SBSの射出成形及び熱処理条件がミクロ相分離構造形成に及ぼす影響,
    第69回高分子討論会,PF0402,2020(9/16-9/18,オンライン)
     

  11. 渡邉裕貴,加納航太,石神明,西辻祥太郎,黒瀬隆,伊藤浩志:
    ミルフィーユ構造を有する高分子材料へのキンク形成とその力学特性,
    公益社団法人日本金属学会2020年秋期(第167回)講演大会,S1.11,
    2020(9/15-9/18,オンライン)(基調講演)
     

  12. 迫優太朗,黒瀬隆,伊藤浩志:
    アルミニウムフレーク充填複合材料におけるフレーク表面処理の影響,
    公益社団法人日本金属学会2020年秋期(第167回)講演大会,P101,2020(9/15-9/18,オンライン)
     

  13. 阿部喜史,黒瀬隆,M. V. A. Santos,金谷陽太,石神明,田中茂雄,伊藤浩志:
    熱溶融積層法を用いて作製した17-4PH鋼部品の工学的特性,
    公益社団法人日本金属学会2020年秋期(第167回)講演大会,P89,2020(9/15-9/18,オンライン)
     

  14. 小栗廉,瀧健太郎,加納航太,櫻井伸一,藪浩,石神明,黒瀬隆,伊藤浩志:
    ミルフィーユ構造を有するブロック共重合体シートの圧縮せん断ひずみによる強化,
    一般社団法人プラスチック成形加工学会第31回年次大会,E-211(Oral) SP07(Poster),
    2020(6/24-6/25,東京)
     

  15. 迫優太朗,黒瀬隆,伊藤浩志:
    アルミニウムフレーク充填エポキシ樹脂複合材料の作製と力学特性評価,
    一般社団法人プラスチック成形加工学会第31回年次大会,G-203(Oral) SP21(Poster),
    2020(6/24-6/25,東京)
     

  16. 半澤優樹,石神明,黒瀬隆,小瀬古久秋,伊藤浩志:
    無機ナノ粒子充填系複合材料の作製と親水性・分散性評価,
    一般社団法人プラスチック成形加工学会第31回年次大会,G-202,2020(6/24-6/25,東京)
     

  17. 中山一希,石神明,黒瀬隆,川崎正博,鈴木啓一郎,伊藤浩志:
    ロール圧延によるポリフッ化ビニリデンの結晶構造制御,
    一般社団法人プラスチック成形加工学会第31回年次大会,SP06,2020(6/24-6/25,東京)
     

  18. 加納航太,石神明,西辻祥太郎,黒瀬隆,伊藤浩志:
    SBSトリブロック共重合体の一軸延伸によるラメラ構造の形態変化,
    2020年度繊維学会年次大会,2P164,2020(6/10-6/12,東京)
     

  19. 劉承穎,石神明,黒瀬隆,伊藤浩志:
    表面改質されたグラフェンの添加が新規溶融混錬法により作製されたUHMWPEコンポジットへ与える影響,
    2020年度繊維学会年次大会,2B19,2020(6/10-6/12,東京)
     

  20. 御子柴翔太,石神明,黒瀬隆,伊藤浩志:
    ポリブチレンテレフタレート/ポリロタキサンブレンドの構造制御および物性評価,
    2020年度繊維学会年次大会,2B17,2020(6/10-6/12,東京)
     

  21. 上田翼,石神明,西辻祥太郎,黒瀬隆,伊藤浩志:
    セルロース繊維強化複合材料の作製および物性・高次構造評価,
    第69回高分子学会年次大会,1Pd108,2020(5/27-5/29,福岡)
     

  22. 移川航,根本昭彦,黒瀬隆,伊藤浩志:
    熱インプリント加工によるフレキシブル微細配線の形成,
    第69回高分子学会年次大会,1Pd078,2020(5/27-5/29,福岡)
     

  23. 渡邉裕貴,石神明,西辻祥太郎,黒瀬隆,伊藤浩志:
    高分子多層フィルムにおけるキンク形成とその力学特性評価,
    第69回高分子学会年次大会,1Pa117,2020(5/27-5/29,福岡)
     

  24. 阿部喜史,石神明,黒瀬隆,金谷陽太,田中茂雄,伊藤浩志:
    FDM式3Dプリンターを用いて作製した金属構造体の工学特性評価,
    公益社団法人日本金属学会2020年春期(第166回)講演大会,P144,2020(3/17-3/19,東京)
     

  25. 迫優太朗,黒瀬隆,伊藤浩志:
    ミルフィーユ構造を有するアルミニウムフレーク充填エポキシ樹脂複合材料の作製と力学特性評価,
    公益社団法人日本金属学会2020年春期(第166回)講演大会,P76,2020(3/17-3/19,東京)
     

  26. 黒瀬隆: 軽量化を目指した貝殻真珠層を模倣した扁平粒子強化高分子複合材料,
    高分子学会東北支部令和元年度東北地区先端高分子セミナー,講演7,2020(3/3-3/4,上山)
     

  27. 大利拓海,石神明,黒瀬隆,伊藤浩志,迎弘文,小森政二,河野英樹:
    フッ素系ポリマー/セラミックス複合材料の高熱伝導絶縁材料の内部構造と成形性評価,
    一般社団法人プラスチック成形加工学会第27回(令和元年度)成形加工シンポジア’19,
    G-210(Oral) P-61(Poster),2019(11/12-11/13,高松)
     

  28. 長谷川幸生,石神明,根本昭彦,黒瀬隆,伊藤浩志:
    液状シリコーンゴム射出成形による表面微細構造転写と物性評価,
    一般社団法人プラスチック成形加工学会第27回(令和元年度)成形加工シンポジア’19,
    A-203(Oral) P-04(Poster),2019(11/12-11/13,高松)
     

  29. 阿部喜史,石神明,黒瀬隆,田中茂雄,伊藤浩志:
    FDM式3Dプリンターによって作製した金属構造体の力学特性,
    一般社団法人プラスチック成形加工学会第27回(令和元年度)成形加工シンポジア’19,
    P-40,2019(11/12-11/13,高松)
     

  30. 高橋沙衣,石神明,黒瀬隆,伊藤浩志,藤田鉦則:
    PP/ガラスウール複合材料を用いたFDMによる3Dプリンティング条件/力学特性/内部構造の評価,
    一般社団法人プラスチック成形加工学会第27回(令和元年度)成形加工シンポジア’19,
    P-39,2019(11/12-11/13,高松)
     

  31. 上田翼,石神明,黒瀬隆,伊藤浩志:
    セルロース繊維強化複合材料の作製と構造・物性評価,
    2019年度繊維学会秋季研究発表会,2F01,2019(11/9-11/10,上田)
     

  32. 半澤優樹,石神明,黒瀬隆,小瀬古久秋,伊藤浩志:
    ナノ粒子充填樹脂複合材料の作製と工業特性評価,
    2019年度繊維学会秋季研究発表会,1F06,2019(11/9-11/10,上田)
     

  33. 御子柴翔太,石神明,黒瀬隆,伊藤浩志:
    ポリブチレンテレフタレート/ポリロタキサンブレンドの力学特性と高次構造解析,
    第68回高分子討論会,2W07,2019(9/25-9/27,福井)
     

  34. 石神明,黒瀬隆,伊藤浩志:
    高せん断加工法を用いた新規ポリマーブレンドの創製とその構造・物性評価,
    第68回高分子討論会,2W06,2019(9/25-9/27,福井)
     

  35. 劉承穎,石神明,黒瀬隆,伊藤浩志:
    新規混練プロセスで作製したグラフェン充填UHMWPE複合材料の耐摩耗性評価,
    第68回高分子討論会,1W15,2019(9/25-9/27,福井)
     

  36. 加納航太,渡邉裕貴,石神明,西辻祥太郎,黒瀬隆,伊藤浩志:
    高分子ミルフィーユ構造のキンク制御と材料創製,
    新学術領域研究 ミルフィーユ構造の材料科学令和元年度夏季研究会,
    9/15 11:35-11:50口頭発表,2019(9/14-9/15,淡路)
     

  37. 渡邉裕貴,石神明,西辻祥太郎,黒瀬隆,伊藤浩志:
    高分子多層フィルムへのキンク形成とその機械特性評価,
    新学術領域研究 ミルフィーユ構造の材料科学令和元年度夏季研究会,PS-44,2019(9/14-9/15,淡路)
     

  38. 加納航太,石神明,西辻祥太郎,黒瀬隆,伊藤浩志:
    SBSトリブロック共重合体を用いた成形加工によるミルフィーユ構造の創製と物性・構造解析,
    新学術領域研究 ミルフィーユ構造の材料科学令和元年度夏季研究会,PS-43,2019(9/14-9/15,淡路)
     

  39. 迫優太朗,黒瀬隆,伊藤浩志:
    金属フレーク粒子とエポキシ樹脂によるミルフィーユ複合材料の作製と力学特性評価,
    公益社団法人日本金属学会2019年秋期(第165回)講演大会,P76,2019(9/11-9/13,岡山)
     

  40. 渡邉裕貴,石神明,西辻祥太郎,黒瀬隆,伊藤浩志:
    高分子ミルフィーユ材料におけるキンク形成とその力学特性評価,
    公益社団法人日本金属学会2019年秋期(第165回)講演大会,P75,2019(9/11-9/13,岡山)
     

  41. 御子柴翔太,石神明,黒瀬隆,伊藤浩志:
    ポリブチレンテレフタレート/ポリロタキサンブレンドの力学特性,
    一般社団法人プラスチック成形加工学会第30回年次大会,SP14,2019(6/12-6/13,東京)
     

  42. 渡邉裕貴,石神明,西辻祥太郎,黒瀬隆,伊藤浩志:
    ミルフィーユ構造を有する多層フィルムの作製とその力学特性評価,
    2019年度繊維学会年次大会,3F08,2019(6/5-6/7,東京)
     

  43. 高橋沙衣,黒瀬隆,藤田鉦則,伊藤浩志:
    PP/GW複合材料フィラメントを用いた3Dプリントにおける力学特性と内部構造の関係,
    2019年度繊維学会年次大会,2P244,2019(6/5-6/7,東京)
     

  44. 大利拓海,石神明,黒瀬隆,伊藤浩志,迎弘文,小森政二,河野英樹:
    窒化ホウ素充填フッ素系ポリマー複合材料の熱伝導 率および内部構造の評価,
    第68回高分子学会年次大会,1G13,2019(5/29-5/31,大阪)
     

  45. 半澤優樹,黒瀬隆,小瀬古久秋,伊藤浩志:
    無機ナノ粒子充填系複合材料の作製とその親水性評価,
    第68回高分子学会年次大会,1Pd102,2019(5/29-5/31,大阪)
     

  46. 黒瀬隆,迫優太郎,伊藤浩志:
    金属フレーク粒子とエポキシ樹脂によるミルフィーユ複合材料の作製と力学特性,
    公益社団法人日本金属学会2019年春期(第164回)講演大会,S1.23,2019(3/20-3/22,東京)
     

  47. 上田翼,黒瀬隆,長澤源伸,馬原誠,伊藤浩志:
    ABS/PMMAブレンドによる高次構造解析と物性評価,
    一般社団法人プラスチック成形加工学会第26回(平成30年度)成形加工シンポジア’18,
    F-108,2018(11/26-11/27,浜松)
     

  48. 榊原史也,石神明,黒瀬隆,馬場文明,伊藤浩志,藤田鉦則:
    極細ガラス繊維充填ポリプロピレン複合材料の射出成形特性と高次構造・物性評価,
    一般社団法人プラスチック成形加工学会第26回(平成30年度)成形加工シンポジア’18,
    F-204,2018(11/26-11/27,浜松)
     

  49. 長谷川幸生,根本明彦,石神明,黒瀬隆,伊藤浩志:
    液状シリコーン射出成形における成形品表面微細転写性および物性評価,
    一般社団法人プラスチック成形加工学会第26回(平成30年度)成形加工シンポジア’18,
    E-207,2018(11/26-11/27,浜松)
     

  50. 太田翔吾,根本明彦,黒瀬隆,伊藤浩志:
    インプリントプロセスを用いた三次元形状表面に対する配線化の基礎検討,
    一般社団法人プラスチック成形加工学会第26回(平成30年度)成形加工シンポジア’18,
    E-213,2018(11/26-11/27,浜松)
     

  51. 伊藤浩志,石神明,西辻祥太郎,黒瀬隆:
    ミルフィーユ構造を有する高分子材料の作製とその靭性評価,
    第135回軽金属学会秋季大会,基調講演77,153-154,2018(11/9-11/11,東京)(基調講演)
     

  52. 石神明,黒瀬隆,伊藤浩志:
    コアシェル構造を有するPA6系三成分ブレンドのモルフォロジーおよび耐衝撃性,
    平成30年度繊維学会秋季研究発表会,1D07,2018(11/1-11/2,福井)
     

  53. P. Muanchan,T. Kurose and H. Ito:
    Fabrication of One-Dimensional Porous Nanostructures by Thermal Nanoimprint Process,
    平成30年度繊維学会秋季研究発表会,1D10,2018(11/1-11/2,福井)
     

  54. 金子千紘,根本昭彦,黒瀬隆,伊藤浩志:
    熱可塑性繊維強化材料を用いた異種接合化とその力学特性の評価
    平成30年度繊維学会秋季研究発表会,Pa32,2018(11/1-11/2,福井)
     

  55. 石神明,黒瀬隆,伊藤浩志:
    Structural and Physical Properties of PA6/SEBS-g-MA/PS Ternary Blends
    平成30年度化学系学協会東北大会,1P111,2018(9/15-9/16,秋田)
     

  56. 渡邊一樹,石神明,黒瀬隆,伊藤浩志:
    ポリメチルメタクリレート/ポリロタキサンブレンドの破壊過程観察および物性評価
    平成30年度化学系学協会東北大会,1P110,2018(9/15-9/16,秋田)
     

  57. 劉承穎,石神明,黒瀬隆,伊藤浩志:
    Evaluation of Engineering Properties and Internal Morphology of Graphite Filled UHMWPE Composites by Octa-Screw Extruder
    平成30年度化学系学協会東北大会,1P109,2018(9/15-9/16,秋田)
     

  58. 大利拓海,石神明,黒瀬隆,伊藤浩志,迎弘文,小森政二,河野英樹:
    フッ素系ポリマー/セラミックス複合材料の高熱伝導絶縁材料の内部構造と成形性評価
    第67回高分子討論会,1Pf082,2018(9/12-9/13,札幌)
     

  59. 佐藤優,根本昭彦,黒瀬隆,伊藤浩志,佐藤信文,佐藤勝,三枝孝拓:
    ホットランナーシステムがポリグリコール酸厚肉射出成形品に及ぼす影響
    第67回高分子討論会,1Pe077,2018(9/12-9/13,札幌)
     

  60. 渡邊一樹,石神明,黒瀬隆,伊藤浩志:
    高透明性ポリメチルメタクリレート/ポリロタキサンブレンドの破壊過程観察と物性評価
    第67回高分子討論会,2H12,2018(9/12-9/13,札幌)
     

  61. 伊藤浩志,樹神祐希,石神明,黒瀬隆,西辻祥太郎:
    高速変形特性に優れた新規ポリアミド6/ポリロタキサンブレンドの創製と破壊過程観察
    第67回高分子討論会,2H08,2018(9/12-9/13,札幌)
     

  62. 榊原史也,石神明,趙雲峰,黒瀬隆,馬場文明,伊藤浩志,藤田鉦則:
    グラスウール充填ポリプロピレン複合材料の高次構造と工業物性評価
    プラスチック成形加工学会第29回年次大会,G-307,2018(6/20-6/22,東京)
     

  63. 佐藤優,根本昭彦,趙雲峰,黒瀬隆,佐藤信文,三枝孝拓,伊藤浩志:
    ポリグリコール酸厚肉射出プレス成形品の形状評価・高次構造評価
    プラスチック成形加工学会第29回年次大会,F-310,2018(6/20-6/22,東京)
     

  64. 石神明,趙雲峰,黒瀬隆,伊藤浩志:
    PA6/SEBS-g-MA/PS三元ブレンドの構造と物性
    プラスチック成形加工学会第29回年次大会,C-316,P-27,2018(6/20-6/22,東京)
     

  65. 榊原史也,石神明,趙雲峰,黒瀬隆,馬場文明,伊藤浩志,藤田鉦則:
    グラスウール充填ポリプロピレン複合材料の高次構造と工業物性評価
    平成30年度繊維学会年次大会,1B10,2018(6/13-6/15,東京)
     

  66. 渡邊一樹,石神明,趙雲峰,黒瀬隆,伊藤浩志:
    非晶性高分子/ポリロタキサンブレンドの破壊過程観察および物性評価
    平成30年度繊維学会年次大会,1E05,2018(6/13-6/15,東京)
     

  67. 黒瀬隆,宍戸啓太,根本昭彦,伊藤浩志:
    ポリエーテルイミドフィルムの熱インプリントによる微細配線構造の形成
    平成30年度繊維学会年次大会,1E04,2018(6/13-6/15,東京)
     

  68. R. Tamamura, C. Nonomura, K. Yamashita, P. Muanchan, Y. Zhao,T. Kurose and H. Ito:
    Relationship between Mechanical Properties and Higher-order Structure of Thermoplastic Polyester Elastomer Moldings
    第67回高分子学会年次大会,1M29,2018(5/23-5/25)
     

  69. P. Muanchan,Y. Zhao,T. Kurose and H. Ito:
    Thermally Conductive One-Dimensional Polymer Nanostructures Obtained by Nanoimprinting with Aluminum Oxide Template
    第67回高分子学会年次大会,2Pe111, 2018(5/23-5/25)
     

  70. 太田翔吾,根本昭彦,趙雲峰,黒瀬隆,伊藤浩志:
    インプリントプロセスによる三次元形状表面へのライン&スペース賦形と配線形成
    第67回高分子学会年次大会,2Pe109,2018(5/23-5/25)
     

PAGETOP